Instrument Technician Course in Jamshedpur, Jharkhand

The Instrument Technician Course in Jamshedpur, Jharkhand at Overseas Industrial Technical Institute offers an in-depth curriculum designed to equip students with essential skills in instrumentation, calibration, troubleshooting, and maintenance for industrial applications.

Instrument technician keeps track of environmental and atmospheric adjustments industrial areas. Instrumentation technicians generally work in chemical plants, food processing plants, power, food, oil, even in telecommunication industries and petroleum refineries et cetera. Instrument Technician Course in Jamshedpur, Jharkhand, Instrumentation technicians are skilled crafts workers who do precision work and are involved in the field of measurement and control. Also they inspect, test, repair, and adjust instruments that locate, measure, and record changes in industrial environments.

Pressure, flow, level and temperature these are the main four foundation measurements that instrumentation and control technicians are deal with. In the situation of being an instrument specialist, your duty is to guarantee most extreme well-being and advisability for the business through the skill and preparing with respect to the working hardware utilized in the business. Instrument specialists’ task consummately lean on the business and settings wherein the business works. The prime primary duty of these professionals is to keep up the best possible working of these motorized control substructures inside the office where they work. These technicians also ask with the manufacturers and manuals to dictate the test and prolongation tasks of particular machinery. The technician uses testing devices to analyse and test instruments and system operations and distinguish problems.

Carrier and Opportunities in Instrumentation Technician Course in Jamshedpur, Jharkhand

There were no great demand for skilled Instrumentation and control technician in the fastest growing processing and manufacturing around the world. However, today manufacturing industries like: Oil and Gas, Petrochemical, Iron, Pharmaceuticals, Refinery, textile industries, Fertilizer, Iron and Steel etc. are recruiting more and more skilled Instrument Technician. In order to install, remove, repair, calibrate, and perform preventive and corrective maintenance on a variety of instruments used to measure various process variables for smooth operation, maximum production, better quality, and safety, instrument technicians are required in the construction, commissioning, and maintenance of plants. Overseas ITI has always produced a great number of success, pursuing Instrumentation Technician in Jamshedpur, Jharkhand will bring the success you have desired for.

---

COURSE CONTENT: Instrument Technician Course in Jameshedpur

PART-1: THEORY OF INSTRUMENTATION AND CONTROL SYSTEM

• Learn the fundamentals of electrical and electronic engineering.
• Study about the Standard of measurement.
• Study about the Instrument Terminology.
• Learn about flow measurement and the principles behind flow measuring equipment.
• Learn about temperature measurement and the mechanism behind temperature measuring equipment.
• Learn the basics of temperature measurement and how temperature measuring equipment works.
• Study the mechanism behind fire and gas measuring devices.
• Learn about vibration measurement and the mechanics of the instruments used to measure vibration.
• Become knowledgeable about the various actuator and valve kinds.
• Research standards Electrical loops with a 4-20 mA signal and pneumatic loops with a 3-15 psi signal comprise the instrument signal.
• Study of the Fieldbus Communication System and HART.
• Study the fundamentals of PLC, DCS, and SCADA.
• Study about PID Control.
• Research on anti-surge control, split, ratio, and cascade control..

PART-2: INSTRUMENTATION ENGINEERING DOCUMENT

• Introduction and familiarization with engineering drawing.
• Piping and Instrument Drawing (P&ID), Process Engineering and Flow Schematic (PEFS).
• Cable interconnection drawings, ILD- Instrument Loop Drawings, and cable scheduling.
• Instrument Data Sheet.
• Hook-up drawing.
• Instrument and equipment Layout and location drawing.
• Function Logic Drawing, Ladder Logic drawing, Cause & Effect Drawing.

PART-3: INDUSTRIAL TOOLS

• Study and familiarization with hand tools such spanners, pliers, screwdrivers, wire strippers, crimpers, tube cutters, and tube benders, etc.
• To learn about power tools, such as drilling and cutting equipment.

PART-4: INSTRUMENT PIPING AND TUBING

• Learn about pipes, tubes, and various compression fittings, such as elbows. Reducers, connectors, etc.
• Practical Instruction in Tube Installation, Cutting, and Bending, etc.
• Practical Training of Connection of Tube using different types of compression Fitting.
• Practical training of Leak Testing.

PART-5: INSTRUMENTATION LAB

• The Overseas Industrial Technical Institute Lab is equipped to provide practical training on the use of all sorts of instruments in the measurement and control of various process variables, such as: Pressure, Flow, and Temperature, Level, and Vibration, Fire and Gas, etc. and Control system like PLC/SCADA.
• Introduction to Inspection Measurement and Test Equipment and Practical Training.
• Testing with a multimeter for voltage, resistance, capacitance, current, diode, and continuity.
• Testing for cable insulation resistance using an insulation resistance tester.
• Measurement and simulation of millivolts using a TC simulator..
• Decade Resistance Box: Resistance Simulation.
• DC Milli-ampere Simulator: Simulation and measurement of milli-amperes.
• Pressure Calibrator: Dead Weight Tester, Hand pump, manometer, Druck & Fluke-Multi Process Pressure calibrator.
• TK-3: Vibration Calibrator.
• Vernier Caliper and Measurement Tape.
• HART-275 and HART-375: Fieldbus Communicator and HART.
• Process measurement and control instrument calibration and testing
• Testing and calibration of the pressure transmitter, RTD, Thermocouple, temperature switch, and temperature gauge..
• Testing and calibration of the flow transmitter, switch, and gauge.
• Level transmitter and switch calibration and testing.
• Vibration Switch, Bently Naveda-3500 Vibration Proximity Probe, Proximeter, and Accelerometer Calibration and Testing.
• Solenoid valve, regulatory control valve, and ON/OFF valve calibration and testing..
• Calibration and testing of smoke detectors and other fire and gas instruments. Three types of detectors: flame, heat, and gas.
• Testing of the proximity switch and the micro-limit switch.
• Testing of the Quick Exhaust, Booster Relay, and Hydraulic and Pneumatic Relays.
• Testing of Electrical Relay and Contactors.